HOSE OXY/ACET 1/4X25FT R-GRADE

Suitable for use with oxygen acetylene only
3/16-Inch by 20 foot red hose for acetylene and green for oxygen
Use with acetylene fuel gas only
Resists kinks, heat, weather and solvents
Bleed hoses when not in use for at least 30 minutes

HEATING NOZZLE ROSEBUD 8-MFA-1

Gas Type: Specifically designed for use with oxy-acetylene, this nozzle is perfect for a variety of heating applications.
Model Number: The Forney Size #8 Heating Nozzle is identified by model number 87790, ensuring you get the right part for your welding needs.
Compatibility: This nozzle is compatible with Victor-style equipment, making it versatile for use with various torch kits, including Forney models 1680, 1702, 1705, 1707, and 1753.
Lightweight Design: Weighing only 0.52 pounds, this nozzle is easy to handle, allowing for precise control during your welding tasks.
Carded Packaging: The nozzle comes carded, ensuring it is protected and easy to store when not in use.

ROTARY FILE PTEND TREE 1X1/2INally hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.

STORAGE ROD 10LBS 14-3/8IN
The Forney 93097 Deluxe Welding Rod Storage Container is made of high impact red polypropylene plastic. It features a screw-type cap and rubber O-ring to provide clean, dry, air-tight storage for electrodes.

WELDER ARC STICK 120VOLT 90AMP

WELDER MACHINE FC-I 140

WHEEL CUT-OFF 4-1/2X0.08X7/8IN

WHEEL CUT-OFF 4-1/2X1/8X7/8IN
aluminum oxide steel cutting wheel. Designed for cutting, abrasion, body work, fabrication and general repair work.

HELMET WELDING ADF BLACK MATTE

Vulcan Sledge Hammer, 20 Lb, Hickory

COMPRESSOR HANDCARRY 100PSI 4G

Enables quick recovery
Cast iron cylinder enhances pump life
High-flow regulator for increased performance
4 gal twin stack tank design proven acceptance in the market
Oil lubricated pump improves durability
Lightweight design for easy use and handling in a variety of orientations
Dual soft start valves assist in cold weather start-up

3.2 cfm delivered at 100 psi pump enables quick recovery. oil lubricated pump improves durability. cast iron cylinder enhances pump life. lightweight at only 53.32 pounds design for easy use and handling in a variety of orientations. high-flow regulator for increased performance. dual soft start valves assist in cold weather start-up. 4 gal twin stack tank design. direct drive. 120 vac, 60 hz, 14 a, 2-pole induction motor. pump speed of 3400 rpm.

Steel Demon? Saw blades are specially designed for the extreme demands of ferrous metal cutting, thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and excellent quality cuts. Blades feature Freud's TiCo hi-density carbide, laser-cut bodies, anti-vibration technology, Perma-SHIELD? non-stick coating, triple chip design and pretensioned blades. Diablo blade can be used on a standards circular saw.

Diablo general-purpose blade is ideal for cutting oak, pine, plywood, pressure-treated lumber and beams. An excellent choice for table and miter saws, Diablo blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades or make quality crosscuts in solid wood or plywood. Great for both sliding and chop style miter saws as well as table saws.

For miter/slide miter saw. Non-stick permashield coating. Axial shear face grind tooth geometry. .098" ultra thin kerf,7-degree hook angle, and 7,000 max rpm.

Diablo's six-piece demolition reciprocating saw blade set brings together two of the brands top selling blades - Demo Demon and Steel Demon. Diablo's reciprocating saw blades are specifically designed for maximum performance in nail-embedded wood and metal cutting/demolition applications. These high-performance blades feature bi-metal technology that delivers up to 5X longer life of standard blades on the market. Diablo's Demo Demon blades feature patented variable tooth technology that provides faster cuts with less vibration. Diablo's Steel Demon blades feature a double tooth configuration with small gullets for faster material removal and extra durability. This set is ideal for the Pro and offers up to 20% savings. Free storage case included.